IP camera Bosh

This type of cameras is used in case the video flow should be taken from Bosh IP-cameras.

This type of data source is used when the video flow must be received from Bosh IP-camera. To select and configure Bosh IP-camera as the data source, one must perform consistently the following steps (see figure Channel settings. Selection and configuration of Bosh IP-camera as the video source):

1. select source type- IP-camera;
2. select type of the camera- Bosh;
3. configure the video flow transmission parameters.

Channel settings. Selection and configuration of Bosh IP-camera as the video source

When Bosh IP -camera is selected as the video source, the video stream transmission parameters can be set for it.

IP address. Enter the IP-address of the camera into this field in format ххх.ххх.ххх.ххх:хххх. Enter the IP-address of the camera before “:” and after this symbol enter the number of the port. Also, entering for this type of camera is possible in format www.xxxxx.xхx:xxxx, where before “:” state URL of the camera, and after “:” enter the number of port.

Login and password. In these fields login and password should be entered for access to the IP-camera. They may be required both for observation and camera management.

Camera’s number. If IP-coder with one or more connected cameras is used, then state in this field number of the camera, video flow from which should be processed.

Profile. If device renders video signal in number of flows, then state in this field number of the flow, signal from which should be processed.

Resolution field does not have to be filled. Camera settings are being used for this type of cameras.

Compression. This field allows to select encoding and decoding options for video transmission - to view, the formats JPEG, MPEG-4 и Н.264 are supported for Bosh IP-camera. Protocol. This field is for choosing the data transfer protocol. TCP, UDP, Multicast protocols are supported for Bosch IP-cameras.

Compression level. This field is for choosing necessary compression level. Raising compression level inversely affects quality of recognition and in direct ratio affects the velocity of the data transmission. Permissible value range is from 1 to 100.