https://docs.vitcompany.com/en/history/IP_camera_Axis?feed=atomIP camera Axis - Revision history2026-04-09T19:02:17ZRevision history for this page on the wikiMediaWiki 1.35.1https://docs.vitcompany.com/index.php?title=IP_camera_Axis&diff=607&oldid=prevSysop@vitcompany.com: 1 revision2015-03-10T11:22:39Z<p>1 revision</p>
<p><b>New page</b></p><div>This type of cameras is used in case the video flow should be taken from Axis IP-cameras.<br />
<br />
<br /><br />
To select and configure Axis IP-camera as the data source, one must perform consistently the following steps (see figure ''Channel settings. Selection and configuration of Axis IP-camera as the video source''):<br />
<br /><br />
# select source type - IP-camera;<br />
# select type of the camera - Axis;<br />
# configure the video flow transmission parameters.<br />
<br />
<br/><br />
[[File:OverseerParkingEng12.png|thumb|center|Channel settings. Selection and configuration of Axis IP-camera as the video source| 900px]]<br />
<br/><br />
<br />
When Axis IP-camera is selected as the video source, the video stream transmission parameters can be set for it.<br />
<br />
<br /><br />
'''IP address'''. Enter the IP-address of the camera into this field in format ххх.ххх.ххх.ххх:хххх. Enter the IP-address of the camera before “:” and after this symbol enter the number of the port. Also, entering for this type of camera is possible in format www.xxxxx.xхx:xxxx, where before “:” state URL of the camera, and after “:” enter the number of port.<br />
<br />
<br /><br />
'''Login and password'''. In these fields login and password should be entered for access to the IP-camera. They may be required both for observation and camera management.<br />
<br />
<br /><br />
'''Camera’s number'''. If IP-coder with one or more connected cameras is used, then state in this field number of the camera, video flow from which should be processed.<br />
<br />
<br /><br />
'''Profile and Resolution''' fields do not have to be filled. Camera settings are being used for this type of cameras. <br />
<br />
<br /><br />
'''Compression'''. In this field state required compression. M-JPEG, MPEG-4 and Н.264 formats are being supported for Axis IP-cameras. <br />
<br />
<br /><br />
'''Protocol'''. This field is for choosing the data transfer protocol. HTTP, MCUST, HTTPS, RTSP protocols are supported for Axis IP-cameras.<br />
<br />
<br /><br />
'''Camera control'''. This setting turns on management of the IP-camera.</div>Sysop@vitcompany.com